Slant Hole Drilling in CSG, CBM & UCG Drilling
With the demands of the Australian Coal Seam Gas (CSG) Drilling and the need to be able to efficiently and quickly move between holes, Schramm Inc and Airdrill have recognized the requirement for a Drill Rig that is both portable and efficient, but still meets the requirements of the Australian CSG Drilling companies. With this in mind Schramm Inc and Airdrill have developed the newest Rig in the Schramm Telemast® Range of Drill Rigs, the T130XD Trailer Mount. Utilizing the Telemast® technology of Schramm the T130XD Trailer Mount is a compact yet efficient Drill Rig that meets all the requirements of CSG, CBM and UCG Drilling.
Mounted on a tandem axle trailer rather than the usual method of carrier mounting, the T130XD Trailer Mount overcomes the licensing hurdles of previous models. This coupled with the capability of Range 3 Casing and Drill Pipe (in the vertical) and Range 2 when drilling slant holes the T130XD Trailer Mount is the most practical Rig on the market for Gas Drilling.
Schramm Telemast equipped model Rotadrills feature fast set-up, long top head travel, short transport length, small foot print, and low site impact. Schramm Inc emphasizes greatly improved productivity and safety on the job site by shortening transportation and set-up time, and automating the handling of heavy and cumbersome drill collars, drill pipe and casing.
Telemast rigs can be supplied with power breakout (hydraulic roughneck), power slips and the Schramm LoadSafe automated pipe handling system and are ideally suited for shallow oil and gas, surface-hole, coal bed methane (CBM), large diameter wells, directional and unconventional drilling applications.
The T130XD Trailer Mount has been designed by incorporating the characteristics of the larger TXD Rotadrill. This has given the T130XD Trailer Mount some distinct advantages. Rotary Head Rotation performance has increased with 185rpm @92,000 in-lbs and 92rpm @ 206,000 in-lbs being produced, this coupled with the increase of the Rapid Feed performance to 83ft/min @130,000lb pullback, 125 ft/min @103,000 lb pullback and 166 ft/min @87,000lb pullback makes the T130XD Trailer Mount the most capable Drill Rig in its class available in Australia.
How the Telemast® Works
The Telemast tower is a two-section mast with the outer mast a static, free-standing member located at the drilling rig base and the inner mast a sliding extendable member that telescopes in and out of the outer mast while drilling is being performed. The drilling top head moves up and down through a simple system of cables and sheaves, in concert with the inner mast, which is powered by double acting hydraulic cylinders.
LoadSafe® Automated Pipe Handling
The Telemast feature is not the only major attribute to be found in the Schramm product line. Just as important is the LoadSafe system, a specially designed drill pipe and casing handling system, which automatically feeds the drill top head one-by-one as additional lengths of drill pipe or casing are added to the string. The LoadSafe system incorporates a special tandem axle trailer for transportation with a conventional road tractor. When set up for drilling activities, the pipe-casing trailer is kept in the horizontal position by a series of outriggers. Up to 40 pieces of pipe can be staged on the LoadSafe hydraulic pipe racks for use during the drilling process.
By hydraulic action, the individual pipe or casing joint that rests in the cradle is tilted up from the horizontal position to a precise incline position so it is in alignment with the drill head assembly, that simultaneously tilts up to receive the pipe or casing. Once the two have been aligned, a hydraulic powered gripping jaw automatically holds the pipe or casing in place while the drill top head is connected to the pipe or casing joint.
With the pipe or casing now connected, the head tilts down simultaneously into the drilling position as the cradle that held the pipe or casing lowers to the horizontal position to receive another pipe or casing joint. The cradle is fed a new piece of drill pipe or casing by rolling from the pipe storage racks into the cradle. This sequence of events is reversed when removing pipe from the string, setting it in the cradle, and rolling it back into the pipe storage racks.
The Schramm LoadSafe system minimizes drill crew size and greatly reduces fatigue and potential personnel injuries when handling heavy drill pipes, collars and casing tubulars. Another very important attribute of the automated pipe-handling system is its versatility to handle large diameter and random length tubulars, important to many operators because longer range III casing is less expensive and less time consuming to run than cut to exact length range III or shorter range I or II casing.
The automated pipe-handling system is a hands-free activity, thus making it inherently much safer than the more common manual pipe-handling systems. Safety is always an important consideration for the driller and this hands-free system helps guard the drilling crew against incurring smashed limbs. Add to the safety factor the superior drilling production and it can be seen why the Schramm Telemast equipped drilling rigs has been an instant success. Schramm has positioned the Telemast rigs in the marketplace as an alternative to conventional double-drilling-rig systems by offering a level of automation not common to the oilfield at an extremely competitive price.
More than just Telemast® Advantages
Schramm Rotadrill products are successful in the energy market because of the following:
o Mechanized handling of tubulars - the machine does not tire.
o Controlled bi-directional drilling means fewer collars, better directional capability, and, the ability to drill out of a hole when necessary.
|Last Updated on Thursday, 09 September 2010 08:14|
Slant Hole Drilling in CSG, CBM & UCG Drilling
Thursday, 09 September 2010 08:10